Manufacturer product imagery · configuration may vary
Sungrow / Inverters
Three-phase hybridSungrow SH10RT three-phase hybrid
A quiet three-phase hybrid that manages solar, a Sungrow battery and a backup circuit for essential loads. In an outage it keeps backed-up circuits running on all three phases, including unbalanced loads.
Choose your inverter size
Including GST. Supply only — installation, switchboard work, metering and any backup wiring are quoted separately.
WHY THIS INVERTER
10 to 10 kW, same inverter underneath.
Every size in this family shares the same hardware, warranty and battery support. What changes is how much power it can push into your home and how many panels it can carry.
10 kW backup power
Wired to a backup circuit, it keeps chosen circuits running when the grid drops, switching over in under 20 ms. Backup needs a battery and extra wiring.
Works with Sungrow SBR and SBH high voltage batteries
Batteries are not interchangeable. Compatibility depends on the voltage window, stack size and the manufacturer approved list, so check the pairing before you buy.
10 year warranty
Parts only, with freight covered to $200. Labour is not covered by Sungrow.
97.9% european efficiency
A weighted figure across a real day, not a lab peak. Across reputable brands this is close to a tie, so warranty and support matter more.
Key specification
- Model codeThe code on the unit and on your proposal
- Rated outputWhat it can send into your home and the grid
- Panels it can carryThe most solar you can put on it and still claim the rebate
- Backup outputWhat can run during a blackout, with a battery and backup wiring
- European efficiencyWeighted across a real day, not a lab peak
- Supply
- Three phase hybrid inverter
- MPP trackersHow many separate groups of panels it can manage.
- 2
- Battery voltage windowThe battery stack has to sit inside this range, which is why stack size affects compatibility.
- 150-600 V
- Weather rating
- IP65
- Dimensions
- 460 x 540 x 170 mm
- Weight
- 27 kg
String voltages, MPPT ranges, protection classes and the full standards list are on the manufacturer datasheet. We check them against your roof, your switchboard and your network limits before quoting. This family is on the Clean Energy Council approved inverter list and complies with AS/NZS 4777.2, which is what keeps your rebate valid — we confirm the listing at the time of install.
If the power goes out, will this keep my house running?
Not on its own. Every grid connected inverter has to shut down in a blackout so it cannot energise the network while linesmen are working on it. To keep circuits alive you need three things together: a battery, an inverter with a backup output, and that backup actually wired to a separate circuit board. This family has the backup output. The battery and the wiring are separate line items on your quote.
Why is the inverter smaller than my panels?
That is the standard Australian design, not a shortcut. Panels almost never produce their rated output once you account for heat, angle, dust and cloud, so a slightly larger array keeps the inverter working in its efficient range for more of the day. The rebate rules allow an array up to 133% of the inverter’s rated output, and the rebate is calculated on panel capacity. The energy lost to clipping is a fraction of a percent a year.
Can I add a battery later, or do I need to decide now?
You can add one later either way. You can replace the inverter with a hybrid, or add a separate battery inverter alongside and keep your existing one running. A hybrid costs a little more up front, so it is worth it when the battery is genuinely coming rather than a maybe.
Is a more efficient inverter worth paying for?
Barely. Across reputable brands the spread is under one percentage point, which is in the order of ten or twenty dollars a year on a typical home. Warranty terms, whether there is a service presence in Australia, and which batteries it supports are worth far more than a decimal point.
How big an inverter am I allowed?
Your network sets the ceiling. In the ACT that is typically 5 kVA per phase, and in NSW around 5 kW per phase, with the exact figure depending on your distributor and your street. Whether your home is single or three phase is the first thing that decides it, so it is the first thing we check.
THE PRODUCT, EXPLAINED
What matters in everyday use.
Very quiet at 30 dB
Backs up essential circuits on all three phases
Wide 150-600 V battery range
10-year Sungrow Australian warranty
Could it suit your home?
Three-phase homes wanting a mid-size battery system with backup for chosen circuits.
Check before you choose
Which circuits should go on backup for my home?
Confirm the exact Australian model, compatibility, installation location and warranty conditions in your final proposal.
THE DETAILS, IN ONE PLACE
Documents, photos & video.
Read the highlights here, then open the manufacturer documents for the detail.
Technical information
Model-specific documents are not yet linked.
Ask us for this document ↗Warranty information
Model-specific documents are not yet linked.
Ask us for this document ↗Match the exact model code and Australian configuration to your proposal. Warranty coverage, conditions and exclusions are set out in the applicable manufacturer document.
What customers and the industry say
Don’t take our word for it.
290 reviews
4.8133
4.7157Recognised by the industry
- ★2026Local Solar Hero, ACTSunWiz Awards 2026
- #22026#2 Battery installer, ACTSunWiz Awards 2026
- #22026#2 Solar installer, ACTSunWiz Awards 2026
- #42024#4 Top-rated solar installers, CanberraSolarQuotes 2024
BACKED BY US, NOT JUST THE MANUFACTURER
A 10-year workmanship warranty on solar and battery installations.
Manufacturers cover their products. We cover the installation. For 10 years from practical completion, a defect that comes from our workmanship in installing your solar panels, inverter or battery — the mounting, the cabling, the installation work — is put right by us: repaired, re-done, or the affected installation part replaced, at our cost and at our choice of remedy.
- It stays with the home. Sell up, and the new owner gets the remainder, on the same terms.
- Switchboard, EV charger and heat pump installation work carries its own 1-year workmanship warranty from the date of installation.
- It covers our work, not the products. A panel, inverter or battery fault is a manufacturer warranty matter, with its own period.
- What it does not cover: damage from misuse, changes or repairs by someone else, storms, surges and grid events, pests and corrosion, building movement, ordinary wear, and internet or monitoring problems. A call-out where no workmanship fault is found may be charged.
- Keep your rights. It adds to the Australian Consumer Law guarantees, never replaces them.
- To claim: email engineering@solar4life.com.au or call 1300 997 005 with your name, the installation address, what is wrong and photos. Tell us promptly; delay can affect a claim.
Residential installations. The full terms are in your installation agreement.
Specifications on this page are taken from Sungrow’s published documentation for the Australian model. We confirm the exact model, how it works with your existing equipment and the current warranty terms before you accept a written quote.