Manufacturer product imagery · configuration may vary
FoxESS / EV charging
OCPP 2.0.1 readyFoxESS A Series EV charger
A compact tethered Type 2 charger in 7.3 kW single-phase and 22 kW three-phase versions, with solar-surplus charging, dynamic load balancing and OCPP 1.6J and 2.0.1 support.
Power and supply
Fully installed, including GST. That is the system, the standard changeover, both trades, the compliance certificates and removal of your old unit. What counts as standard is spelled out below.
WHAT THE PRICE COVERS
Installed, not just delivered.
FoxESS's A Series charger, chosen to match your supply.
Included in a standard installation
What can add to it
None of these are hidden surprises. We look for every one of them before quoting, and if any apply you will see the cost in writing before anything is ordered.
Your selected charger
- Model codeThe code on your quote and your warranty registration
- SpecificationThe figures that decide whether it fits where the old one sat
- WarrantyDifferent parts of the system are covered for different lengths of time
- Cable
- 6 m tethered Type 2
- Comms
- Bluetooth, WiFi, Ethernet, optional 4G
- Protection
- AC 30 mA and DC 6 mA residual current detection
- Size
- 190 x 320 x 130 mm, up to 6.3 kg
THE PRODUCT, EXPLAINED
What matters in everyday use.
6 m tethered cable
OCPP 2.0.1 ready, so it can move to another charging network
IP65 body, IK08
Built-in 6 mA DC fault detection
Could it suit your home?
Homes wanting an open-standard charger that pairs well with a FoxESS system.
Check before you choose
Which version suits my supply: single phase 7.3 kW or three phase 22 kW?
Confirm the exact Australian model, compatibility, installation location and warranty conditions in your final proposal.
THE DETAILS, IN ONE PLACE
Documents, photos & video.
Read the highlights here, then open the manufacturer documents for the detail.
Technical information
Model-specific documents are not yet linked.
Ask us for this document ↗Warranty information
Model-specific documents are not yet linked.
Ask us for this document ↗Match the exact model code and Australian configuration to your proposal. Warranty coverage, conditions and exclusions are set out in the applicable manufacturer document.
What customers and the industry say
Don’t take our word for it.
290 reviews
4.8133
4.7157Recognised by the industry
- ★2026Local Solar Hero, ACTSunWiz Awards 2026
- #22026#2 Battery installer, ACTSunWiz Awards 2026
- #22026#2 Solar installer, ACTSunWiz Awards 2026
- #42024#4 Top-rated solar installers, CanberraSolarQuotes 2024
BACKED BY US, NOT JUST THE MANUFACTURER
A 1-year workmanship warranty on the installation, and the manufacturer’s warranty on the EV charger.
The manufacturer covers the EV charger itself. We cover our installation work: for 1 year from the date of installation, a defect that comes from our workmanship is put right by us — repaired, re-done, or the affected installation part replaced — at our cost and at our choice of remedy.
- It covers our work, not the product. A fault in the EV charger itself is a manufacturer warranty matter.
- Keep your rights. It adds to the Australian Consumer Law guarantees, never replaces them.
- What it does not cover: damage from misuse, changes or repairs by someone else, storms, surges and grid events, pests and corrosion, building movement, ordinary wear, and internet or monitoring problems. A call-out where no workmanship fault is found may be charged.
- To claim: email engineering@solar4life.com.au or call 1300 997 005 with your name, the installation address, what is wrong and photos. Tell us promptly; delay can affect a claim.
Residential installations. The full terms are in your installation agreement.
Specifications on this page are taken from FoxESS’s published documentation for the Australian model. We confirm the exact model, how it works with your existing equipment and the current warranty terms before you accept a written quote.